Topcross solder connectors
Soldering bush installed in cross-linked polyolefin heat shrink tubing with an adhesive inner lining
A simple, quick solution for manufacturing tight, moisture sealed cable connections. Simply insert the relevant stripped cable in the connector and then melt the soldering ring using a hot air gun Then heat the connector with the gun until adhesive escapes from the ends.
- Shrink ratio 3:1
- Continuous operating temperature IEC 216 -40°C to +110°C
- Tensile strength 11.5 mPa
- Elongation 250%
- Minimum shrink temperature +110°C to 200°C
- Dielectric strength VDE 0303 part 2 13 kV/mm min
- Non-flammability passed
- Resistant to fluid
- Version that conforms with RoHS also available
| Art. no. | Type | Colour | Inner dia. (min.) in mm | Inner dia. (max.) in mm | Wall thickness in mm | Sleeve length in mm | Overall length in mm | For wire ranges from to | Qty in pack |
| 4902Z000P0350 | WSLR | red | 4,5 | 1,4 | 1,1 | 5,0 | 35,0 | 0,5 - 1,5 mm2 | 100 |
| 4906Z000P0350 | WSLB | blue | 5,5 | 1,8 | 1,2 | 5,0 | 35,0 | 1,5 - 2,5 mm2 | 100 |
| 4904Z000P0400 | WSLG | yellow | 6,8 | 2,2 | 1,3 | 5,0 | 40,0 | 4,0 - 6,0 mm2 | 100 |
Safety instructions:
Only qualified personnel are permitted to insulate, connect, repair and seal electrical components connected to electrical voltages above 48V.